|
 |
BH-24 TYPE 4-AC
(HD HALF HANGER 45°/WELD)
STD 'A' DIMS
11.75", 16.25", 23.75",
35.75"
CUSTOM 'A' DIMS AVAILABLE
*ACTUAL CAPACITY IS
DEPENDANT ON STRENGTH OF STUDS AND THE WELD TO THE
STUDS. REFER TO 'HANGER WELDING' INFO SHEET. |
|
 |
BH-24
TYPE 4-AS
(HD
HALF HANGER 45°/WELD)
*ACTUAL CAPACITY IS
DEPENDANT ON STRENGTH OF WELD TO THE BEAM. REFER TO
'HANGER WELDING' INFO SHEET.
|
|
 |
BH-24
TYPE 4-APR
(HD
HALF HANGER 45°/CAST-IN)
HANGERS COME STD. WITH A
BEARING PLATE TO DISPERSE LOAD TO HELP PREVENT SPALLING
OF CONCRETE. GALVANIZED FINISH STD. |
|
 |
BH-25
TYPE 1-A
(ADJUSTABLE HALF HANGER 45°/CLIPS)
SPECIFY 'A' DIM AND
REBAR SIZE
*ACTUAL CAPACITY IS
DEPENDANT ON STRENGTH OF STUDS. ACTUAL CAPACITY TO BE
DETERMINED BY CONTRACTOR WITH FIELD TESTS. TWO CLIPS
NECESSARY FOR SAFE USE. |
|
 |
BH-60
TYPE 1-A
(STD
HANGER 90°/45° NO INTERLOCK)
NOTE: DO NOT USE THIS
HANGER WHEN A SCREED MACHINE IS RUN ON THE OVERHANG. |
|
 |
BH-60
TYPE 4-A
(HD
HANGER 90°/45° WITH INTERLOCK)
NOTE: USE THIS HANGER
WHEN A SCREED MACHINE IS RUN ON THE OVERHANG. |
|
 |
BH-68
TYPE 4-A
(HD
HANGER 45°/HOOK WITH INTERLOCK)
NOTE: USE THIS HANGER
WHEN A SCREED MACHINE IS RUN ON THE OVERHANG. |
|
 |
HOOK BOLT
STD SIZE:
1/2" DIA. x 1-1/2" x 4-1/2"
x 5° BEND
1/2" DIA. x 1-1/2" x 6" x
5° BEND
FLANGE THICKNESS RANGE:
1/2" - 2-1/2"
(4-1/2" BOLT)
1/2" - 4" (6" BOLT) |
